Gunsmith Services

Creating Your Perfect Gun
Contact

Houston’s Premier Gunsmiths

Our Gunsmith department is here to meet our patrons needs when it comes to everything from custom built AR-15’s, tuned 1911’s, one of a kind Cerakote jobs, to fixing Great Grandpa’s 1938 Smith & Wesson revolver. We have the tools, machines and the experience to provide you with the best full service Gunsmith in the Woodlands/Conroe area.

Just picked up a new pistol and need new sights? Drop it off at the counter and grab a cup of coffee at Cafe 2A.

– GUNSMITH –

Gunsmith Pricing

General Services Price
Quick Charge 20.00
Shop minimum (minimum charge when logging in a firearm) 45.00
Gunsmith tech time ($50 for first 30 min. $20 for each additional 15 min block) 50.00
Professional boresighting 40.00
Professional scope mounting and boresighting 65.00
Professional sight-in on the range 25 yards (ammo not included) 45.00
Professional sight-in on the range 100 yards (ammo not included) 50.00
Professional sight-in on the range 200 yards (ammo not included) 100.00
Professional sight-in on the range 300 yards (ammo not included) 150.00
Any rush jobs 100.00/+50%
Cut new length of pull 120.00
Recoil pad installation (parts not included, hourly charge for any stock modification) 120.00
Labor one hour 85.00
Machine Labor one hour 100.00
Rifle break-in on request 350.00
Remove stuck round (starting at) 40.00
Quick Clean Services Price
Most revolvers and semi-auto handguns 45.00
Long guns 55.00
Double barrels 65.00
Detailed Cleaning & Inspection Services Price
Most revolvers and semi-auto handguns 75.00
Long guns 85.00
Double barrels 95.00
Diagnostics and Repairs Services Price
Most revolvers and semi-auto handguns 110.00
Long guns 120.00
Double barrels 140.00

**Because repairs can range in time and cost, those will be quoted at a rate of $85/hr. This price includes ammo and test fire for up to 5 rounds of common calibers

General AR-15 Services Price
Quick Clean 55.00
Complete disassembly, clean, safety check, oil and reassemble 85.00
Repairs (Starting at) 65.00
Professional bore-sighting 40.00
Professional scope mounting and bore-sighting 65.00
Install and time brake 60.00
Remove old brake 20.00
Pin and weld muzzle device ($120 for removal of old muzzle device) 85.00
Assembly Services
Install trigger 45.00
Install binary/echo trigger 70.00
Check headspace 60.00
Completely assemble a lower from parts kit 75.00
Completely assemble an upper from parts kit (additional charges may apply) 85.00
Complete assemble (from parts) 140.00
Maintenance Rebuild (new control springs, buffer spring and gas rings included) 150.00
Install barrel (stripped upper, otherwise use Complete upper price) 50.00
Random accessories (minimum charge) 35.00
Install accessory handrail, forend, or free float tubes, many variations (upcharges may be applied for removal of old parts or part fitting) 65.00
Machine Services
Open gas port for reliability 65.00
Permanently attach muzzle break (incl. touch up on finish) 85.00
Open ejection port for large caliber (.50 Beowulf, .458 socom…) 80.00
Cut and crown barrel 22″+ (Disassembly Additional) 150.00
Cut and crown barrel under 22″ (Disassembly Additional) 175.00
Thread end of barrel for muzzle brake or suppressor (1/2×28, 9/16×24, 5/8×24)(starting at)(additional tear down costs may incur to gain access to barrel for threading)(installing muzzle device is additional)
Thread end of barrel 22″+ 200.00
Thread end of barrel under 22″ (upcharge for barrel removal may apply) 250.00
Cut crown and thread barrel 22″+ 300.00
Cut crown and thread barrel under 22″ (upcharge for barrel removal may apply) 350.00

Note: Thread end of barrel for muzzle brake or suppressor (1/2×28, 9/16×24, 5/8×24) (Starting at) (additional tear down costs may incur to gain access to barrel for threading)(installing muzzle device is additional)

General Services Price
Long guns – Quick Clean 55.00
Long Guns – DC&I 85.00
Long Guns – Repairs 120.00
Double Barrels – Quick Clean 75.00
Double Barrels – DC&I 95.00
Double Barrels – Repairs 140.00
Bag of gun assembly charge 125.00
Check headspace (upcharge for difficult disassembly may apply) 60.00
Pour chamber cast (upcharge for difficult disassembly or cleaning may apply) 80.00
Professional boresighting 40.00
Professional scope mounting and boresighting 65.00
Professional Sight-in one the range up to 25 yards (ammo not included) 45.00
Professional Sight-in one the range up to 100 yards (ammo not included) 50.00
Professional Sight-in one the range up to 200 yards (ammo not included) 100.00
Professional Sight-in one the range up to 300 yards (ammo not included) 150.00
Lap barrel (run lapping compound down rifiling to break off any burrs on a fresh barrel)(disassembly may be additional) 80.00
Lap Bolt lugs (insures full contact on locking lugs, may adjust headspace) 80.00
Install pre-threaded and chambered barrel (not including polishing and possible fitting) 10.00
Install trigger (minor adjustment included) 60.00
Adjust trigger (starting at)(cleaning may be additional) 60.00
Polish trigger (starting at)(cleaning may be additional) 90.00
Machine Services
Drill & tap (Per hole) 45.00
Barrel removal (additional charges may apply) 65.00
Barrel removal and install (starting at) 90.00
Install tactical bolt knob (parts not included) 80.00
Cut and crown barrel 22″+ 150.00
Cut and crown barrel under 22″ 175.00

Thread end of barrel for muzzle brake or suppressor

(1/2×28, 9/16×24, 5/8×24)(starting at)(additional tear down costs may incur to access barrel for threading)(installing muzzle device is additional)

Thread end of barrel 22″+ 200.00
Thread end of barrel under 22″ (upcharge for barrel removal may apply) 250.00
Cut crown and thread barrel 22″+ 300.00
Cut crown and thread barrel under22″+ (upcharge for barrel removal may apply) 350.00
Chamber Savage rifles (bolt, extractor & feed work additional)(may require barrel removal, reamer) Crowning and threading is additional 220.00
Chamber most rifles (bolt, extractor & feed work additional)(may require barrel removal, reamer) Crowning and threading is additional 280.00
Semi-auto Rifles (Garand/FAL)(install time and chamber)(starting at) 300.00
Upcharge uncommon calibers (starting at) $50.00
Stock Services
Cut new length of pull 120.00
Recoil pad installation (parts not included)(hourly rate for any stock modification) 120.00
Install sling swivel (synthetic may require epoxy) 40.00
Install sling swivel pair (synthetic may require epoxy) 70.00
Adjustable LOP (parts additional) 185.00
Adjustable comb hardware install 300.00
Install recoil reducer (starting at) 120.00
Inletting
Inlet for after market bottom metal (starting at) 120.00
Stock inletting chamber area of barrel (starting at) 140.00
Stock inletting of open barrel channel (starting at) 210.00
Fit and bed semi complete stock (starting at) 320.00
Glass Bedding                    (DCOA or $45 clean & tear down required)
Recoil lug 80.00
Bottom metal 120.00
Install alluminum pillars and glass bed 160.00
Entire action – lug to tang 185.00
Entire action and bottom metal 260.00
Glass bed full length (entire action, barrel channel)(starting at) 300.00
Glass bed ful length and bottom metal (entire action, bottom metal, barrel channel)(starting at) 380.00
Stock Repairs
Minor Damage (starting at)(stock refinish is additional) 70.00
Heel, butt or toe broken/cracked (starting at)(stock refinish additional) 150.00
Tang or comb broken/cracked (starting at)(stock refinish additional) 250.00
Stock Refinish
Satin Hunters finish (additional charge for complex stocks may apply) 250.00
Satin Master finish (pores filled)(additional charge for complex stocks may apply) 350.00
Gloss Hunters finish (Additional charge for complex stocks may apply) 380.00
Gloss Master finish (pores filled)(additional charge for complex stocks may apply) 480.00

 

 

 

Note: Thread end of barrel for muzzle brake or suppressor (1/2×28, 9/16×24, 5/8×24) (Starting at) (additional tear down costs may incur to gain access to barrel for threading)

General Shotgun Services
Long guns – quick clean 55.00
Long guns – DC & I 85.00
Long guns – repairs 120.00
Double barrels – quick clean 65.00
Double barrels – DC& I 45.00
Double barrels – repairs 140.00
Bag of  gun assembly charge 100.00
Install accessories (heat shields, side saddles, furniture) (starting at) 60.00
Cut barrel and crown 120.00
Cut double, crown, and fill gap 200.00
Trigger work (parts not included) (starting at) 70.00
Machine Services
Drill & tap (for initial set up, each additional hole is $15) 45.00
Drill & tap for sight bead (one) 45.00
Drill & tap for sight beads (two, same set up) 70.00
Install ghost ring 120.00
Stock Services
Cut new LOP (requires new rocoil pad and install) 120.00
Recoil pad installation (parts not included, hourly for any stock modification) 120.00
Install sling swivel (synthetic may require epoxy) 40.00
Install sling swivel pair (synthetic may require epoxy) 70.00
Adjustable LOP (parts additional) 185.00
Adjustable comb hardware install 300.00
Install recoil reducer (starting at) 120.00
-Inletting-
Inlet for stock tang (starting at) 100.00
Inlet for foreend contacting barrel (startng at) (refinish extra) 100.00
Inlet foreend to slide over mag tube or pump (starting at) 150.00
-Stock repairs-
Minor damage (starting at)(stock refinish is additional) 70.00
Heel, butt or toe broken/cracked (starting at) (stock refinish is additional) 150.00
Tang or comb broken/cracked (starting at) (stock refinish is additional) 250.00
-Stock Refinish-
Satin hunters finish (additional charge for complex stock may apply) 250.00
Satin master finish (pores filled) (additional charge for complex stocks may apply) 350.00
Gloss hunters finish (additional charge for complex stock may apply) 380.00
Gloss master finish (pores filled) (additional charge for complex stocks may apply) 480.00
General Revolver Services Price
Quick clean revolvers 45.00
DC & I revolvers 75.00
Repairs revolvers 110.00
Bag of gun assembly charge 120.00
Polish chambers (starting at) 120.00
Chamfer chambers (starting at) 120.00
Cut for moon clip (need moon clip for HS) 200.00
Timing repair (starting at) 150.00
Front sight install 70.00
Revolver action job / clean and smooth action (spring kits and parts additional) 120.00
Smith & Wesson J, K, L, N frames and Ruger GP100, SP101, rebarrel most revolvers (remove old barrel, install factory barrel) 200.00
Conceal carry package (Parts not included)  trigger job, action polish, trigger contour, hammer bobbed and contoured 250.00
Machine Services
Drill & tap (for initial set up, each additional hole is $15) 45.00
Porting 3×3 180.00
Accuracy Services
Forcing cone 80.00
Oversize Cylinder Stop 85.00
Oversize Hand 85.00
Recrown most revolvers 100.00
Single Action Services
Cowboy action tune (parts not included) 300.00
Oversize cylinder/base pin 65.00
Oversize hand 90.00
Recrown most revolvers 100.00
Half cock hammer trigger kit (parts not included) 150.00
Polish
Semi mirror finish 1200.00
Mirror finish 2400.00
General Pistol Services Price
Quick clean pistol 45.00
DC & I Pistol 75.00
Repairs Pistol 110.00
Bag of gun assembly charge 120.00
Install sights of any kind on most pistols, when milling is not required (sights additional) 60.00
Polish feed ramp (starting at) 50.00
Install after-market Gunsmith fit barrel (starting at) 75.00
Trigger Work (Parts Additional)
Glock trigger kit install (starting at) 65.00
Sig Sauer (Starting at) 65.00
Smith & Wesson M & P trigger kit install (apex and similiar kits) 85.00
Springfield XD trigger kit install (powder river precision and similar kits) 85.00
FN509 trigger kit install 85.00
CZ 75/SP-101 etc. trigger kit install and tune or polish 100.00
Machine Services
Mill cocking serrations in the front of the slide, refinishing additional (starting at) 200.00
Red dot slide mount (Burris, Holosun, RMR, Vortex) 220.00
Polymer Services
-Gripwork-
Finger groove removal 60.00
High cut 60.00
Support notch 60.00
Triple threat (finger groove remove, high cut and support notch) 150.00
Grip reduction (removes hump of the backstrap on Glocks and other common pistols) 180.00
-Stippling-
Stipple frame – standard 180.00
Stipple frame – light (front and back strap like on M & P shields) 120.00
Accelerator Pads (shelved relief finger rests) 80.00

General 1911 Services

Drop in Part Install -Minor tuning- Price
                        Extractor tune (aids in seeding and capturing of round) 60.00
                        Feed ramp polish (aids in feeding) 80.00
Drop in Part Install -Little to no fitting-
Mainspring housing 60.00
Mag release 45.00
Stake on front sight (does not include sight) 80.00
Drop in thumb safety fitting (fit block to sear) 65.00
Drop in thumb ambi safety fitting (fit block to sear) (grip mondification starting at $35) 65.00
Drop in grip safety fit (fit block to trigger) (no major frame modification) 90.00
Drop in grip safety fit with frame modification (fit block to trigger and frame to grip safety) (requires refinishing which is not included) (starting at) 180.00
Drop in fit slide to frame 160.00
Drop in fit bushing to current barrel and slide 40.00
Drop in fit compensator bushing to current barrel and slide 80.00
Drop in fit match barrel hood 80.00
Drop in fit match barrel hood and lugs 120.00
Drop in fit barrel lower lugs 70.00
Drop in fit barrel and bushing to slide and frame (requires purchase of barrel, barrel link and pin) 200.00
Trigger work -Little to no polish or fitting-
Install drop in, hammer, trigger, sear, or disconnector (starting at $60, $30 for each additional part) (no tuning of spring) 60.00
Trigger work -Polish and minor fitting-
Trigger work (Minor tuning of spring and internal clean up) 150.00
Trigger work – Series 80 (Minor tuning of spring and internal clean up) 180.00
Precision Part fitting -Perfect fit blend- (Requires Refinish)
Mainspring housing 200.00
Mag release 80.00
Thumb safety fit and blend 160.00
Ambi safety fit and blend (grip modification additional) 200.00
Grip safety (beavertail) Fit and blend 300.00
Dehorn frame and slide (starting at) 400.00
Blend and tune extractor 120.00
Precision Part fitting -Accuracy and barrel work-
Fit slide to frame 250.00
Fit matching bushing to current barrel and slide 80.00
Fit compensator bushing to current barrel and slide 120.00
Fit match barrel hood 120.00
Fit match barrel hood and lugs (center strike) 160.00
Fit match barrel lower lugs 100.00
Fit match barrel and bushing to slide and frame (requires purchase of barrel, barrel link and pin) 250.00
45 degree crown on barrel and flush cut 100.00
Precision Part fitting -Trigger and hammer work- (Parts not included unless specified different)
Fit match hammer 90.00
Fit match trigger 90.00
Fit match sear 90.00
Match trigger work (Polish internals, set angles, tune spring) (quality of trigger pull and engagement is limited by quality of parts) 200.00
Match trigger work Series 80 (Polish internals, set angles, tune spring) (quality of trigger pull and engagement is limited by quality of parts) 250.00
Machine Services -Slide Modifications-
Mill slide for low profile rear sight 160.00
Mill slide for front dovetail sight 75.00
Install stake on front sight, does not include sight 85.00
Serrate rear of slide (includes extractor) to 40 lines per inch (refinishing may be additional) 120.00
Lower and flare ejection port 120.00
flat top slide 120.00
Tri top slide 250.00
Machine Services -Frame Modifications
Recessed takedown pin hole and re-shaped pin 120.00
Bobtail contour, (starting at) (additional refinishing required) 150.00
Bobtail conversion, most common (additional refinishing required) 180.00
Polish
Semi mirror finish 850.00
Firearms Price
Most long guns (Rifle/Shotgun) (Stock at $100) (Fire controls not included) 350.00
Most handguns (Fire controls not included) 300.00
Pistol (slide or frame) (Fire controls not included) 160.00
Most revolvers (barrel, frame, and cylinder included)(fire controls not included) 350.00
AR-15, M1, SKS, AK-47, FN-FAL style rifles (Fire controls not included) 400.00
AR (Upper or Lower) (Fire controls not included) 160.00
Accessories (Single color)
Individual parts/ fire controls (each color change $15 extra) 60.00
Stocks (standard or two piece stocks) 180.00
Standard optics and red dots 200.00
Most rings or bases 80.00
Flashlights 120.00
Forend rails 120.00
Tumbler cups 70.00
Grips or 2 magazines 60.00
Additional Costs
Additional color ($45 for each color added, $15 for each additional) 30.00
Free hand camo or distressing 65.00
Simple stencil (Punisher logo, simple flag, etc.) (1 additional color included) 120.00
Camo stencil (BDU, tiger stripe, etc.) (2 additional colors included) ($20 for each additional color) 240.00
Unique Stencil (Kryptek, Multicam woodgrain, etc.) (3 additional colors included) ($20 for each additional color) 250.00
Color matching 75.00
Letter Fill (starting at, per side/part) 65.00
Compound Bows
Price is only for Cerakote application.  See archery for disassmebly prices
Cams (both for $100, one for $60.00 100.00
Riser 100.00
Stabilizer 65.00
Sights 120.00

Personalized Gunsmith Tech Time

Having reliability or accuracy issues with your firearm or have a technical question such as how to properly maintain your gun?

BOOK ONE-ON-ONE TECH TIME
WITH ONE OF OUR GUNSMITHS
$20 for each 15 minute block of time

Great opportunity to ask about sights, disassembly
techniques, custom build consultations
and Gunsmithing tips & tricks

★ Price includes required range time if facilities are available
★ Repair cost is NOT included
★ Ammo cost is NOT included

Fill out the form at the bottom of of this
page to book your appointment today!

Firearm Zeroing

We will take your firearm and sight it in on our private range to your desired distance and with your desired ammo.

100 yard sight in – $50
200 yard sight in – $100
300 yard sight in – $150
Any rush jobs add – $100

★ Great opportunity to have your gun ready for hunting season or hog extermination
★ Ammo cost is NOT included
★ NO reloaded Ammo
★ Mounting of Optics is NOT included

Stippling Patterns

.

I recently bought a rifle that hadn’t been shot since the previous owner got it 20+ years ago. I wanted to get it checked out by a gunsmith just to be sure it was safe for me to shoot. After contacting many different gunsmiths and getting no reply, I decided to visit Saddle River Range. The gunsmith took my rifle apart right if front of me, checking to make sure every little thing was in good condition. He even shot it to make sure everything functioned properly. I was in and out of the range within fifteen minutes. I couldn’t have asked for better service. I will definitely be back.
– Carolyn

Contact Us For Gunsmith Services

We perform Gunsmithing services and provide support for every type of firearm, regardless of manufacturer. Our highly skilled support team takes great pride in performing this art and we offer an extensive range of services to keep you in the field or on the firing line.

We are bred from the worlds of Bullseye, International/Olympic, Combat/Tactical and IDPA/IPSC pistol shooting disciplines. High power rifle, long range and tactical ‘long gun’ engagement are also our fortes and we have plenty of expertise and experience in Skeet, Trap and plain ole’ ‘beer can’ shooting. We are hunters and simple aficionados – we are you.

We have decades of experience in military and commercial, old and new firearms, simple and complex machining and metallurgy.

We can’t list everything we do so phone, email, or better yet, come see us! You can also fill out the contact form here, with all of your information, and one of our highly trained gunsmiths will contact you soon with your information. Lets talk about how we can help you.

Gunsmith Services of Saddle River Range is growing, but its ebb and flow are based on its customers. So drop us a line and let us know how we’ve helped you or even how we’ve failed, so we can make it right and keep improving.

2 + 11 =